Digital Strom bridge for DALI, EnOcean and hue v2
plan44.ch Digital Strom bridges (legacy) - P44-DSB-DEH
P44-DSB-DEH extends your Digital Strom system by third-party lights, buttons, sensors and actuators.
P44-DSB-DEH uses the new Digital Strom virtual device connector technology to seamlessly integrate new devices such that these become as simple to use as regular Digital Strom devices.
A single P44-DSB-DEH device connects to up to 64 DALI dimmable lights, many wireless buttons, sensors and actuators and Philips "hue" color LED lights
The P44-DSB-DEH is a cost effective way to extend a Digital Strom system for climate control (EnOcean),
small office lighting (DALI), modern LED lighting of various kinds (DALI, hue), light switches that can be
placed everywhere (EnOcean).
It only requires a single P44-DSB-DEH to connect a lot of third party devices
that ideally complement Digital Strom components
The P44-DSB-DEH firmware can be updated by a simple press of a button to receive support for new devices,
new features and general improvements.
The firmware is based on plan44.ch's modular "vdcd" open source project,
which allows for custom modifications and extension to be implemented by plan44.ch upon request as well as third parties.
More Information
- Firmware info + supported devices list
- P44-DSB-DEH manual, PDF
- P44-DSB Sensor Evaluators manual, PDF
- P44-DSB-DEH leaflet, PDF
- New: P44-DSB - Information for installation and support
- P44-DSB-DEH Dimensions+Connections, PDF
- FAQ + Support
- Visit the plan44 community forum.
Availability
- Discontinued, some reduced price remaining stock available in plan44 online shop directly (Switzerland only)
- Please see replacement product P44-DSB-DEH2
News
DALI - dimmable (color) lights, simple 2-wire bus
DALI is a mature and widely used industry standard (IEC 62386) for lighting devices.
P44-DSB-DEH brings the simplicity of Digital Strom's plug and play concept to the growing range of DALI
enabled lights - LED power supplies and fluorescent tube ballasts likewise.
Just connect them to
the bus and these lamps become part of the Digital Strom system.
Up to 64 DALI slave devices can be connected to a two wire bus. The bus is powered and controlled by the P44-DSB-DEH, which acts as the DALI master.
Unlike some other DALI master devices, the P44-DSB-DEH does not need any manual configuration of DALI devices, but automatically detects all devices connected, and makes them available as Digital Strom compatible lights.
The device works with preconfigured DALI devices (existing short addresses) or new unconfigured devices from factory. Bus address collisions can be resolved via the web interface.
Compatible DALI devices are available from many vendors, including Unidim, Osram, Tridonic, TCI, Meanwell, TCI, Helvar and many more.
DALI control gear (e.g. presence detectors or illumination sensors) is not supported and can interfere with operation of the P44-DSB-DEH. Please use respective Digital Strom terminal blocks or EnOcean sensors instead.
Currently supported DALI profiles:
| Functionality | Profile(s) | Status |
|---|---|---|
| DALI multi channel dimmer used for RGB or RGBW lamps | color dimmer | full Digital Strom dSS level integration RGB or RGBW dimmer groups can be configured as a single full color light and appear as a single device with color controls in the dSS |
| DALI single channel dimmer | dimmer | full Digital Strom dSS level integration Works like yellow dimmer terminal blocks |
| DALI dimmer group | dimmer group | full Digital Strom dSS level integration Multiple DALI dimmer devices, grouped together on the DALI level to act like a single yellow dimmer terminal block. All dimmers in a group have perfectly synchronized timing. |
| DALI DT8 (device type 8) tunable white and color lights | DT8 | full Digital Strom dSS level integration DT8 DALI devices can support color and tunable white using only a single DALI address. |
| DALI dual channel dimmer used for tunable white lamps | tunable white dimmer | full Digital Strom dSS level integration Two dimmers can be configured as a single light with tunable color temperature |
- full / partial Digital Strom dSS level integration
- full / partial integration via task specific dSS apps
- full / partial low level integration, but device features accessible for app development only at this time
- Supported as beta version
- Integration planned for a future firmware release
EnOcean - wireless energy harvesting devices
EnOcean is a technology for wireless, usually self powered (energy harvesting) buttons, sensors and actuators.
Adding EnOcean devices is as simple as pressing two buttons - first the learn button of the P44-DSB-DEH, second the learn button of the EnOcean device.
The P44-DSB-DEH has a built-in EnOcean radio module (TCM310) to receive data from EnOcean buttons and sensors and transmit commands to EnOcean actuators like heating valves. The P44-DSB-DEH firmware automatically detects the EnOcean device's EEP (enocean equipment profile) to integrate different types of devices into the Digital Strom system. For example, climate related sensors and actuators will appear as blue climate Digital Strom blocks, buttons act as light switches by default but can be used for other functions as well.
Compatible EnOcean devices are available from a wide variety of manufacturers such as Eltako, Thermokon, alphaEOS, Kieback&Peter and many more
Currently supported EnOcean Equipment Profiles (EEP):
| Functionality | Profile(s) | Status |
|---|---|---|
| Temperature sensors, various ranges | A5-02-xx | full Digital Strom dSS level integration All indoor temperature sensors can be used in the Heating Controller app. All sensor values can be processed via dSS App States (user defined states) or using P44-DSB Evaluator Devices to trigger activities in the dSS when reaching threshold values. The values from sensors are also accessible via the dSS JSON API. |
| Indoor temperature / humidity sensors | A5-04-01 | full Digital Strom dSS level integration Only temperature can be used in heating app. Humitity sensor value can be processed using P44-DSB Evaluator Devices to trigger signals to the dSS when reaching threshold values. The humidity sensor value is also accessible via the dSS JSON API. |
| Outdoor temperature / humidity sensors | A5-04-02 | full Digital Strom dSS level integration Sensor values can be processed via dSS App States (user defined states) or using P44-DSB Evaluator Devices to trigger activities in the dSS when reaching threshold values. The values from sensors are also accessible via the dSS JSON API. |
| Temperature / humidity sensors | A5-04-03 | full Digital Strom dSS level integration |
| Illumination sensors | A5-06-01..03 | full Digital Strom dSS level integration Sensor values can be processed via dSS App States (user defined states) or using P44-DSB Evaluator Devices to trigger activities in the dSS when reaching threshold values. The values from sensors are also accessible via the dSS JSON API. |
| Illumination sensors | A5-06-04..05 | full Digital Strom dSS level integration Sensor values can be processed via dSS App States (user defined states) or using P44-DSB Evaluator Devices to trigger activities in the dSS when reaching threshold values. The values from sensors are also accessible via the dSS JSON API. |
| Occupancy sensors | A5-07-01..02 | full Digital Strom dSS level integration |
| Occupancy and illumination sensor | A5-07-03 | full Digital Strom dSS level integration Sensor values can be processed via dSS App States (user defined states) or using P44-DSB Evaluator Devices to trigger activities in the dSS when reaching threshold values. The illumination value is also accessible via the dSS JSON API. |
| Light / temperature / motion / presence sensors | A5-08-01 | full Digital Strom dSS level integration Sensor values can be processed via dSS App States (user defined states) or using P44-DSB Evaluator Devices to trigger activities in the dSS when reaching threshold values. The values from sensors are also accessible via the dSS JSON API. |
| CO sensor, with optional temperature sensor | A5-09-02 | full Digital Strom dSS level integration Sensor values can be processed via dSS App States (user defined states) or using P44-DSB Evaluator Devices to trigger activities in the dSS when reaching threshold values. The values from sensors are also accessible via the dSS JSON API. |
| CO2 sensor, with optional humidity and temperature sensors | A5-09-04 | full Digital Strom dSS level integration Sensor values can be processed via dSS App States (user defined states) or using P44-DSB Evaluator Devices to trigger activities in the dSS when reaching threshold values. The values from sensors are also accessible via the dSS JSON API. |
| Various Room control panels | A5-10-01..0D, -10..17, -22, -23 | full Digital Strom dSS level integration Temperature sensors can be used by Heating controller app. Sensor and control dial values can be processed via dSS App States (user defined states) or using P44-DSB Evaluator Devices to trigger activities in the dSS when reaching threshold values. The values from sensors and control dials are also accessible via the dSS JSON API. |
| Energy meter | A5-12-01 | full Digital Strom dSS level integration The sensor values can be processed via dSS App States (user defined states) or using P44-DSB Evaluator Devices to trigger activities in the dSS when reaching threshold values. The values from sensors are also accessible via the dSS JSON API. |
| Weather Station | A5-13-01/02 | full Digital Strom dSS level integration Sensor values can be processed via dSS App States (user defined states) or using P44-DSB Evaluator Devices to trigger activities in the dSS when reaching threshold values. The values from sensors are also accessible via the dSS JSON API. The DCF 77 clock features of certain weather stations are not supported. |
| Wind sensor | A5-13-07 | full Digital Strom dSS level integration Sensor values can be processed via dSS App States (user defined states) or using P44-DSB Evaluator Devices to trigger activities in the dSS when reaching threshold values. The values from sensors are also accessible via the dSS JSON API. |
| Multi-function window and door contacts, glas breakage, lock state, supply voltage | A5-14-01...0A | full Digital Strom dSS level integration |
| Heating valve actuator | A5-20-01 | full integration via task specific dSS apps Supported by digitalSTROM heating app. |
| Heating valve actuator | A5-20-04 | full integration via task specific dSS apps Supported by digitalSTROM heating app. Advanced configuration options in this profile are only partially supported. |
| Harvesting Heating valve actuator | A5-20-06 | full integration via task specific dSS apps Supported by digitalSTROM heating app. Advanced configuration options in this profile are only partially supported. |
| Temperature and water sensor | A5-30-03 | full Digital Strom dSS level integration |
| Central Control for Blinds | A5-38-08 | Integration planned for a future firmware release Blinds control with separate channels for position and angle, working with standard shadow behaviour in DS and the "window covering" profile in matter. |
| Electronic switches and dimmers | D2-01-xx | full Digital Strom dSS level integration Output devices with one or multiple outputs. Each output appears as a separate device and can be used for switching or dimming lights or as a generic relay. |
| Single button with battery indicator | D2-03-0A | full Digital Strom dSS level integration |
| Blinds Control for Position and Angle | D2-05-xx | Integration planned for a future firmware release Blinds control with separate channels for position and angle, working with standard shadow behaviour in DS and the "window covering" profile in matter. |
| Multisensor Window Handle | D2-06-xx | full Digital Strom dSS level integration Note: firmware before 2.0.0.3 only supports clicks for the buttons but no "dimming" (press and hold) because window handles do not report button release fast enough. From 2.0.0.3 onwards "dimming" works, however with a slightly longer delay than usual (~1 Second). |
| Lock - Bolt and catch state | D2-07-00 | full Digital Strom dSS level integration |
| Multichannel Temperature Sensor | D2-0A-00,01 | Integration planned for a future firmware release Temperature sensor usage is "undefined", which means not directly usable as room or outside temperature sensor. This is because devices using this profile are usually technical temperature sensors in heating/cooling systems and need to be processed by P44 evaluators or script before signalling to DS. |
| Temperature / humidity sensor + smoke detector | D2-14-30 | full Digital Strom dSS level integration |
| Temperature / humidity / illumination sensor | D2-14-40 | full Digital Strom dSS level integration |
| 1-3 phase AC current clamps | D2-32-xx | full low level integration, but device features accessible for app development only at this time Current values can be used in user defined states dS-app or P44-DSB evaluators No support yet (2018) in dS for using values for overall consumption measurement in the consumption dS app |
| Single contact | D5-00-01 | full Digital Strom dSS level integration This is a generic contact profile in EnOcean, so it reports 1 for active and 0 for inactive contact. Please note that this is inverted compared to what digitalSTROM expects for window and door contacts (0 for closed window, 1 for open window). In this case, please use the "inverted" configuration (selectable in the info dialog of the contact in the P44-DSB Web-UI). |
| Single one-way button | F6-01-01 | full Digital Strom dSS level integration |
| Dual two-way rocker buttons | F6-02-xx | full Digital Strom dSS level integration |
| Quad two-way rocker buttons | F6-03-xx | full Digital Strom dSS level integration |
| Key card switch | F6-04-xx | full Digital Strom dSS level integration Usable in event responder |
| Wind speed threshold detector | F6-05-00 | full Digital Strom dSS level integration |
| Liquid Leakage detector | F6-05-01 | full integration via task specific dSS apps |
| Smoke detectors like Eltako FRW or alphaEOS GUARD | F6-05-02 | full Digital Strom dSS level integration Only reporting of alarm and low battery supported, but no remote alarm reset or other functions (these are proprietary extensions of some manufacturers not available for generic integration) |
| Window handles | F6-10-xx | full Digital Strom dSS level integration |
- full / partial Digital Strom dSS level integration
- full / partial integration via task specific dSS apps
- full / partial low level integration, but device features accessible for app development only at this time
- Supported as beta version
- Integration planned for a future firmware release
- Please Note: Older documentation may list EnOcean profiles A5-xx-xx as 07-xx-xx, D5-xx-xx as 06-xx-xx and F6-xx-xx as 05-xx-xx.
The P44-DSB-DEH firmware will be updated to support new profiles as needed - if a profile you need is not yet supported, please let us know.
hue - colorful LED lights, wirelessly controlled
"hue" lights are colored LED lights from Philips/Signify, which can be wirelessly controlled via smartphone apps and third party software
P44-DSB-DEH makes hue lights become part of your Digital Strom light scenes. Create your multi-colored light scenes, then recall them by simply pressing the light switch.
The P44-DSB-DEH automatically detects and connects to the "hue" bridge by press of a button. Once connected, all hue lights appear as Digital Strom (yellow) light devices. All normal hue functionality remains unaffected, you can still control the lights via hue mobile app, the hue cloud and third party apps. The monochrome hue "lux" and tunable white "ambient" lights are also supported.
Currently supported hue profiles:
| Functionality | Profile(s) | Status |
|---|---|---|
| hue tunable white (ambiance) lamp | ambiance | full Digital Strom dSS level integration |
| hue color lamp | hue | full Digital Strom dSS level integration |
| LivingColors mood light | LivingColors | full Digital Strom dSS level integration |
| hue lux warm white lamp | lux | full Digital Strom dSS level integration |
- full / partial Digital Strom dSS level integration
- full / partial integration via task specific dSS apps
- full / partial low level integration, but device features accessible for app development only at this time
- Supported as beta version
- Integration planned for a future firmware release
Open Source - the basis of P44-DSB-DEH
P44-DSB-DEH is based on plan44.ch's "vdcd" virtual device connector daemon open source project. Being based on open source, the P44-DSB-DEH allows third parties to contribute features and build their own versions for experiments and support of new hardware. "vdcd" is not restricted to run on the P44-DSB-DEH but can be used on different platforms.
However, only buying the P44-DSB-DEH product from plan44.ch entitles you to get ready to use firmware updates from plan44.ch.
"Digital Strom" is a registered trademark of Digital Strom AG, Schlieren, Schweiz, see digitalstrom.com
"DALI" is a registered trademark of the Zentralverband Elektrotechnik- und Elektronikindustrie e.V., see dali-ag.org
“Hue Personal Wireless Lighting” is a trademark owned by Koninklijke Philips Electronics, N.V., see meethue.com
“EnOcean” is a registered trademark of EnOcean GmbH, 82041 Oberhaching, Deutschland, see enocean.com